On this page, cookies are needed if you want to use the full range of the page. Please activate cookies and refresh that page. After refresh a cookie management dialogs will be available.

The cookie settings on this website are set to 'allow only strictly necessary' to give you the very best experience. If you continue without changing these settings, you consent to this - but if you want, you can change your settings at any time at the bottom of this page.

 

Praesideo Peripherals


 
Loudspeakers Line Isolator System
  • Provides redundant loudspeaker loops for public address and voice alarm systems
  • Dramatically reduces cost and complexity of installations, by largely eliminating expensive E30 cabling
  • Six loudspeaker loops per Master Unit, and up to 50 Isolator Boards per loop
  • Operates on 24 and 48 VDC backup power
  • Walk Test mode and installation test button for easy fault-finding and installation
 
 
Network splitter
  • Two current-limited network tap-offs
  • Supports redundant network connection on main loop
  • Can feed power from an external supply to the network
  • Indicators for power and fault status
 
 
PSP-D00039 Master and PSP-D00040 Slave RCS
  • Redundant network controller switch pair
  • Supports redundant network connection on main loop
  • Can feed power from an external supply to the network
  • Indicators for power and fault status
 
 
PRS‑FIN, PRS‑FINNA and PRS‑FINS Fiber Interfaces
  • Redundant network connection
  • Indicators for power and fault status
  • Two supervised control inputs
  • Can use a local power supply
 
 
End-of-line supervision set
  • Loudspeaker line monitoring without additional cabling
  • Supervision-master mounting in the power amplifier
  • Supervision-slave mounting at the end of the loudspeaker line
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Supervision-slave powered from the power amplifier
 
 
Supervision Control Board
  • Multiple speaker and line monitoring without additional cabling
  • Mounted inside the power amplifier
  • Controls up to 80 speaker and line supervision boards
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
 
 
LSP Supervision Board LBB4441_00
  • Loudspeaker and loudspeaker line monitoring without additional cabling
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Powering of the supervision-board from the power amplifier
  • Communication is not affected by the audio signals on the loudspeaker line
 
 
EOL Supervision Board
  • Loudspeaker line monitoring without additional cabling
  • Open-circuit fault detection
  • Compatible with 100 V and 70 V loudspeaker lines
  • Powering of the supervision-board from the power amplifier
  • Communication is not affected by the audio signals on the line
 
 
PLN‑24CH12 24 V and PRS‑48CH12 48 V Battery Chargers
  • 12 A battery charger
  • 6x 40 A, 3x 5 A outputs
  • 150 A back‑up current
  • Fully supervised, EN 54‑4 certified
  • Under‑voltage and over‑voltage protection