EOL: DINION capture 7000

DINION capture 7000
  • DINION 2X technology produces clear, consistent, accurate license plate images
  • Night Capture Imaging System ensures 24/7 performance and eliminates headlight glare
  • Advanced Ambient Compensation minimizes overexposed plates for improved ALPR accuracy
  • Adjustable imaging modes allow configuration for regional plate characteristics
  • Overview camera for vehicle identification
  • Overview
    Operational Range 3.8 to 28.0 m (12.5 to 92.0 ft)
    IR Illumination Pulsed LED array, 850 nm
    Nominal Plate Width North America: 110 pixels Europe: 130 pixels (with 4CIF encoding at optimal capture distance)
    Usable Plate Width North America: 80–140 pixels Europe: 100–170 pixels (with 4CIF encoding over capture range)
    Maximum Capture Speed 225 km/h (140 mph) Must meet 30° mounting criteria.
    Automatic Mode Switching Adjustable switch point depending on ambient light levels, mode selectable
    Sensor
    Type 1/3-inch CCD, monochrome
    Active Pixels (PAL) 752 x 582
    Active Pixels (NTSC) 768 x 494
    Horizontal Resolution 540 TVL
    Video Output Composite video 1 Vpp, 75 ohm
    Synchronization Internal only
    Auto Black Automatic continuous, Off
    Dynamic Range 120 dB (20-bit image processing)
    Dynamic Noise Reduction Auto, On/off selectable
    Sharpness Sharpness enhancement level selectable
    AGC AGC On or Off (0 - 30 dB) selectable
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17 character editable string, position selectable
    Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes 6 preset programmable modes
    Remote Control Bilinx coaxial bi-directional communication
    Video Motion Detection One area, fully programmable
    Privacy Masking Four independent areas, fully programmable
    Controls OSD operation (multi-lingual)
    Lens 5-50 mm varifocal, calibrated to optimal capture distance
    Sensor
    Type 1/3-in. CCD, WDR, dual shutter
    Active Pixels (PAL) 752 x 582
    Active Pixels (NTSC) 768 x 494
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)
    Full video (100 IRE) Usable picture (50 IRE) , Usable picture (30 IRE)
    Color 2.4 lx (0.223 fc) , 0.47 lx (0.044 fc) , 0.15 lx(0.0139 fc)
    Color + SensUp 10x 0.24 lx (0.0223 fc) , 0.047 lx (0.00437 fc) , 0.015 lx (0.00139 fc)
    Monochrome 0.98 lx (0.091 fc) , 0.188 lx (0.0174 fc) , 0.060 lx (0.0056 fc)
    Monochrome + SensUp 10x 0.098 lx (0.0091 fc) , 0.019 lx (0.00176 fc) , 0.0060 lx (0.000557 fc)
    Horizontal Resolution 520 TVL
    Signal-to-Noise Ratio >50 dB
    Video Output Composite video 1 Vpp, 75 ohm
    Synchronization Synchronized to pulsed infrared for night mode
    Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
    Sensitivity Up Adjustable from Off up to 10x
    Day/Night Color, Mono, Auto
    Auto Black Automatic continuous, Off
    Dynamic Engine XF-Dynamic, 2X-Dynamic, SmartBLC
    Dynamic Range 120 dB (20-bit image processing)
    Dynamic Noise Reduction Auto, On/off selectable
    Sharpness Sharpness enhancement level selectable
    SmartBLC On (includes 2X-Dynamic ) / Off
    AGC AGC On or Off (0 – 30 dB) selectable
    Peak White Invert On/Off
    White Balance ATW, ATWhold and manual (2500 to 10000K)
    Cable Compensation Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17 character editable string, position selectable
    Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes 6 preset programmable modes
    Remote Control Bilinx coaxial bi-directional communication
    Video Motion Detection One area, fully programmable
    Privacy Masking Four independent areas, fully programmable
    Controls OSD operation (multi-lingual)
    Lens 5-50 mm IR corrected varifocal, calibrated for vehicle overview capture
    Input Voltage 11-30 VDC or 24 VAC ±10%
    Power Consumption
    All Models 36 W, maximum
    12 VDC 32 W, typical at –40°C (–40°F) 17 W, typical at 20°C (68°F)
    24 VAC 28 W, typical at –40°C (–40°F) 13 W, typical at 20°C (68°F)
    Power 2-wire flying lead
    Video and Control 2 BNC connectors, one for each camera
    Weatherproofing IP 67, Type 4X (NEMA 4X)
    Operating Temperature –40°C to +50°C (–40°F to 122°F)
    Storage Temperature –40°C to +70°C (–40°F to 158°F)
    Cold Start-up Temperature –40°C (–40°F), typically requires a 15-minute warm up prior to operation
    Operating/Storage Humidity 0% to 100% relative, condensing
    Wind Load 144 km/h (90 mph)
    Dimensions (H x W x L) 350 x 269 x 139 mm (13.8 x 10.6 x 5.5 in.), housing with sunshield only
    Weight 6 kg (15 lb)
    Construction Material
    Housing Robust, weather sealed aluminum casting and extrusion
    Window Borosilicate
    Color Bosch White
    Finish All-weather coating
    Bracket Wall mount included

    Images

     
  • Certificates (2)
    Title Type Language
    Declaration of Conformity PDF
    CSA PDF
     
  • Documents (5)
     
  • Software & Support (4)
     
 

Accessories

UPA-2450-60 PSU, 120VAC 60Hz, 24VAC 50VA out

UPA-2450-60 PSU, 120VAC 60Hz, 24VAC 50VA out

Indoor power supply for camera. 120 VAC, 60 Hz In; 24 VAC, 50 VA Out

Commercial Type No.: UPA-2450-60
Product No.: F.01U.076.154

 
UPA-2450-50 PSU, 220VAC 50Hz, 24VAC 50VA out

UPA-2450-50 PSU, 220VAC 50Hz, 24VAC 50VA out

Indoor power supply for camera. 220 VAC, 50 Hz in; 24 VAC, 50 VA out

Commercial Type No.: UPA-2450-50
Product No.: F.01U.076.157

 
 
PSU-124-DC050 Universal Power Supply 24V DC 50W

PSU-124-DC050 Universal Power Supply 24V DC 50W

Universal Outdoor Power Supply, Input: 120 to 230 VAC, 50/60 Hz; Output: 24 VDC, 50 W

Commercial Type No.: PSU-124-DC050
Product No.: F.01U.214.979

 

MBE-15W POLE MOUNT ADAPTER WHITE

White adapter plate used to attach a DINION capture 5000/7000, an MBE-27, or an MBE-28 to a pole (also compatible with an EXMB.020B Heavy Duty L Bracket)

Commercial Type No.: MBE-15W
Product No.: F.01U.247.981

 
 

MBE-17W WALL MOUNT ADAPTER WHITE

White adapter plate used to attach a DINION capture 5000/7000, an MBE-27, or an MBE-28 to a wall (also compatible with an EXMB.020B Heavy Duty L Bracket)

Commercial Type No.: MBE-17W
Product No.: F.01U.247.983