EOL: EX65 Explosion Protected Camera

EX65 Explosion Protected Camera
  • Electropolished 316L stainless steel or aluminum construction
  • High-resolution, high-sensitivity Dinion 2X imager with WDR
  • Integrated junction box
  • ATEX, UL, IECEx, and INMETRO Certifications
  • Sunshield included
  • Easy one-piece installation
  • Optional integrated Fiber Optics
  • Overview
    Rated Voltage 12–24 VAC, 50/60 Hz 12–24 VDC
    CCD Type 1/3-in. Interline, WDR dual shutter
    Power Consumption
    Standard Models(BNC connector) Fiber Optic Models (ST connector)
    12 VDC (Tamb @ 20 °C) (68 °F) 6 W , 7.7 W
    24 VAC (Tamb @ 20 °C) (68 °F) 9.4 W , 11.3 W
    12 VDC (Tamb @ -50 °C)(-58 °F) 10.2 W , 11.3 W
    24 VAC (Tamb @ -50 °C) (-58 °F) 15.7 W , 17.6 W
    12 VDC (Tamb @ 20 °C)(68 °F) 8.0 W , 9.5 W
    24 VAC (Tamb @ 20 °C)(68 °F) 11.2 W , 13.4 W
    12 VDC (Tamb @ -50 °C)(-58 °F) 16.0 W , 14.7 W
    24 VAC (Tamb @ -50 °C)(-58 °F) 19.3 W , 22.4 W
    Active Pixels
    PAL Model: 752 x 582
    NTSC Model 768 x 494
    Sensitivity (3200 K, scene reflectivity 89%, F1.2)
    Full video (100 IRE) Usable picture (50 IRE) , Usable picture (30 IRE)
    Color 2.4 lx (0.223 fc) , 0.47 lx (0.044 fc) , 0.15 lx(0.0139 fc)
    Color + SensUp 10x 0.24 lx (0.0223 fc) , 0.047 lx (0.00437 fc) , 0.015 lx (0.00139 fc)
    Monochrome 0.98 lx (0.091 fc) , 0.188 lx (0.0174 fc) , 0.060 lx (0.0056 fc)
    Monochrome + SensUp 10x 0.098 lx (0.0091 fc) , 0.019 lx (0.00176 fc) , 0.0060 lx (0.000557 fc)
    Horizontal Resolution 540 TVL
    Signal-to-Noise Ratio >50 dB
    Video Output Composite video 1 Vpp, 75 ohm
    Synchronization Internal, Line Lock, HV-lock and Genlock (Burst lock) selectable
    Shutter Auto (1/50 [1/60] to 1/10000) selectable Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
    Sensitivity Up Adjustable from Off up to 10x
    Day/Night Color, Mono, Auto
    Auto Black Automatic continuous, Off
    Dynamic engine XF-Dynamic, 2X-Dynamic, SmartBLC
    Dynamic range 120 dB (20-bit image processing)
    Dynamic Noise Reduction Auto, On/off selectable
    Sharpness Sharpness enhancement level selectable
    SmartBLC On (includes 2X-Dynamic ) / Off
    AGC AGC On or Off (0–30 dB) selectable
    Peak White Invert On/Off
    White Balance ATW, ATWhold and manual (2500 to 10000K)
    Alarm Output VMD or day/night switch
    Alarm Output Relay 30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA
    Cable Compensation(coax version only) Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)
    Camera ID 17-character editable string, position selectable
    Test Pattern Generator Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
    Modes Six (6) preset programmable modes
    Remote Control(coax version only) Bilinx coaxial bi-directional communication
    Video Motion Detection One area, fully programmable
    Privacy Masking Four (4) independent areas, fully programmable
    Controls OSD with soft-key operation (multi-lingual)
    Lens 5–50 mm IR corrected
    Heater Included
    Optical Connector Type ST
    Optical Fiber Compatibility 50/125 µm or 62.5/125 µm, graded index multimode glass fiber rated for a minimum bandwidth of 600 MHz-Km. For 50/125 fiber, subtract 4 dB from the specified optical budget value.
    Optical Distance Specifications Specified transmission distances are limited to the optical loss of the fiber and any additional loss introduced by connectors, splices, and patch panels. The modules are designed to operate over the entire optical loss budget range, so they do not require a minimum loss in order to operate.
    Number of Fibers One (1)
    Optical Budget 14 dB
    Maximum Distance 4.0 km (2.5 miles)
    Technology Type AM Video modulation
    Wavelength 850 nm
    Optical Emitter LED
    Transmitter Output Power 25 uW (–16 dBm)
    Video Bandwidth 5 Hz to 10 MHz
    Differential Gain < 5%
    Differential Phase < 5°
    Tilt < 1%
    Signal-to-Noise Ratio (SNR) > 55 dB @ 10 dB attenuation > 60 dB @ 7 dB attenuation
    Dimensions (L x W x H) 381 x 114 x 114 mm (11.01 x 4.5 x 4.5 in.) without sunhood or mounting cradle
    Weight Stainless Steel: 12.9 kg (28.5 lb) Aluminum: 6.4 kg (14 lb)
    Construction Electropolished 316L Stainless Steel or Anodized Aluminum
    Bracket Pan(±36°)/Tilt(±45°), mounting cradle included
    Cable Entry Four (4) 3/4-in. NPT entries; conduit seal included with NTSC models; M20 adapter included with PAL models
    View Window 9-mm thick borosilicate float glass
    Operating Temperature
    - Aluminum models -50 °C to 60 °C (-58 °F to 140 °F)
    - Stainless steel models -50 °C to 55 °C (-58 °F to 131 °F)
    Storage Temperature -55 °C to 70 °C (-67 °F to 158 °F)
    Operating Humidity 0 to 100% relative (condensing, after installed and sealed)
    Storage Humidity 20 to 98% relative (non-condensing)




    TVL540 Outdoor EX IP67
  • Certificates (5)
    Title Type Language
    UL PDF
    UL PDF
    UL PDF
    UL PDF
    Declaration of Conformity PDF
  • Documents (10)
  • Software & Support (7)


UPA-2430-60 Power Supply

Power supply for camera. 120 VAC, 60 Hz; 24 VAC, 30 VA Out

Commercial Type No.: UPA-2430-60
Product No.: F.01U.075.079


UPA-2450-60 Power Supply, 120 V, 60 Hz

Indoor power supply for camera. 120 VAC, 60 Hz In; 24 VAC, 50 VA Out

Commercial Type No.: UPA-2450-60
Product No.: F01U076154


UPA-2420-50 Power Supply

Power supply for cameras. 220 VAC, 50 Hz In; 24 VAC, 20 VA Out

Commercial Type No.: UPA-2420-50
Product No.: F.01U.076.160


EXS-ADPT EX65-to-MIC Mount Adapter, Stainless Steel

Adapter that allows the EX65 camera or illuminator to be mounted on a MIC wall mount bracket (MIC-WMB) and then to one of a variety of other MIC Series mounting brackets.

Commercial Type No.: EXS-ADPT
Product No.: F.01U.285.559


MIC-CMB-S Corner Mount Bracket, Stainless Steel

Corner mount bracket, grade 316 stainless steel

Commercial Type No.: MIC-CMB-S
Product No.: F.01U.087.269


MIC‑WMB‑S Wall Mount Bracket, Stainless Steel

Wall mount bracket, grade 316 stainless steel (Requires MIC‑SPR or MIC‑PMB for secure mounting because of weight.)

Commercial Type No.: MIC-WMB-S
Product No.: F.01U.087.264

MIC-WMB-MG Wall Mount Bracket, Grey

MIC-WMB-MG Wall Mount Bracket, Grey

Wall Mount Bracket.

Grey (RAL 7001). Available in specific regions only. Sand finish.

Commercial Type No.: MIC-WMB-MG
Product No.: F.01U.296.299


MIC-SPR-S Spreader Plate, Stainless Steel

316L stainless steel spreader plate suitable for brickwork surface mounting, plain finish

Commercial Type No.: MIC-SPR-S
Product No.: F.01U.143.162



Adaptor for UTP twisted pair output

Commercial Type No.: VDA-455UTP
Product No.: F.01U.026.705


LTC 4642/00 Video Receiver, Rack Module

850 nm FOM, video signals, use with LTC 4637 series rack

Commercial Type No.: LTC 4642/00
Product No.: 4.998.138.177

VP-CFGSFT Configuration Tool for Imaging Devices

VP-CFGSFT Configuration Tool for Imaging Devices

Camera configuration software for use with Bilinx cameras

Commercial Type No.: VP-CFGSFT
Product No.: F.01U.500.481